Banner
Navigation
loco-info.com
The reference for locomotives and railcars
Navigation
Random
Search
Compare
Settings
Weimar-Berka-Blankenhainer T 10
go back
Deutschland | 1938
only one produced
Image of locomotive
„Die Weimar-Berka-Blankeinhainer Eisenbahn” von Kurh/Haußen

A few years after the T 05, the WBBE ordered a second railcar with the same dimensions but different power train technology. After the unsuccessful diesel-electric version, diesel-mechanical propulsion equipment with three engines was now used, each driving a bogie. The engines were located under the floor and were each connected to a Mylius gearbox. Due to the smaller engines, a small luggage compartment could now be accommodated in each car and the number of seats increased by 33.

The control impulses for the engines and transmissions were transmitted electrically and pneumatically from the respective driver's cab. Due to the resulting delay, the three systems did not run synchronously, which resulted in damage after a short time. During the war, due to the difficulties and lack of fuel, the vehicle was often used as an unpowered car on steam trains. In contrast to the T 05, the T 10 came to West Germany after the war, where it was initially fitted with two new MaK engines in 1947 and the Jakobs bogie lost its drive. In 1953 the engines were exchanged again for those from Büssing. Until 1963 it was used between Trier and Bullay and between 1965 and 1968 it was used again as a passenger car.

Allgemein
Bauzeit1938-1940
HerstellerDUEWAG
AchsfolgeB-B-B 
Spurweite4 ft 8 1/2 in (Normalspur)
Sitze176
Maße und Gewichte
Länge123 ft 9 1/16 in
Radstand108 ft 0 7/8 in
Fester Radstand8 ft 6 3/8 in
Dienstmasse128,970 lbs
Reibungsmasse128,970 lbs
Achslast21,605 lbs
Kessel
Triebwerk
Antrieb
Antriebdieselmechanisch
Max. Geschwindigkeit40 mph
MotorDWK 2x4V 18V
Bauart Motor3x 8-Zyl. Boxer Diesel
Motorleistung531 hp (396 kW)
Berechnete Werte
Dieseltriebwagen
Nahverkehr
last changed: 02/2022
Search
loadding loading...

We use cookies to save the following settings:

  • selected navigation structure
  • selected language
  • preferred units
  • spelling of railway company names

If you refuse the use of cookies, the settings will only be retained for the current session and will be reset to the default values the next time you visit the site.

Display of units

Here you can set the desired unit system for the technical data.

  • Metric: Lengths in meters, weights in tonnes, and volumes in cubic meters
  • Imperial (UK): Lengths in feet/inches, weights in long tons and volumes in imperial gallons
  • Imperial (US): Lengths in feet/inches, weights in pounds, and volumes in US gallons
  • Individual: Depends on the country of origin of each locomotive
Operator names

Here you can set the display of railway company names.

  • Short: Abbreviation or short form of the name
  • Standard: commonly used name, partially translated to English
  • Complete: full name in local language