loco-info.com
The reference for locomotives and railcars
Navigation
Random
Search
Compare
Settings

Navigation

Page views since 2023-01-26: 689521
Missouri-Kansas-Texas classes L-1a and L-1b
United States | 1913
70 produced
No. 764, one of the engines with baker valve gear in Dallas, Texas
No. 764, one of the engines with baker valve gear in Dallas, Texas
collection Taylor Rush

In 1913 and 1914, the MKT received 60 Mikados from ALCO-Brooks with Walschaerts valve gear, which were listed as class L-1a. Their Number was augmented in 1914 by ten more, which received Baker valve gear and were listed as Class L-1b because of this difference. They were initially coal fired but underwent a conversion to oil firing by 1922. The new tenders now held 2,990 gallons of oil instead of 14 short tons of coal and had a slightly smaller water reserve. The boiler pressure had meanwhile been increased from 185 to 195 psi

Variantas builtrebuilt oil-fired
General
Built1913-19141922
ManufacturerALCO
Axle config2-8-2 (Mikado) 
Gauge4 ft 8 1/2 in (Standard gauge)
Dimensions and Weights
Wheelbase35 ft 1 in
Rigid wheelbase16 ft 6 in
Total wheelbase70 ft 7 1/2 in
Service weight287,500 lbs
Adhesive weight214,500 lbs
Total weight457,000 lbs455,500 lbs
Axle load53,625 lbs
Water capacity8,500 us gal8,000 us gal
Fuel capacity28,000 lbs (coal)2,990 us gal (oil)
Boiler
Grate area57.5 sq ft
Firebox area250 sq ft
Tube heating area3,378 sq ft
Evaporative heating area3,628 sq ft
Superheater area887 sq ft
Total heating area4,515 sq ft
Variantas builtrebuilt oil-fired
Power Plant
Driver diameter61 in
Boiler pressure185 psi195 psi
Expansion typesimple
Cylinderstwo, 26 1/2 x 30 in
Power
Power sourcesteam
Estimated power2,575 hp (1,920 kW)2,650 hp (1,976 kW)
Optimal speed30 mph
Starting effort54,309 lbf57,245 lbf
Calculated Values
steam locomotive
freight
last changed: 09/2022
loading...

We use cookies to save the following settings:

  • selected navigation structure
  • selected language
  • preferred units
  • spelling of railway company names

If you refuse the use of cookies, the settings will only be retained for the current session and will be reset to the default values the next time you visit the site.

Display of units

Here you can set the desired unit system for the technical data.

  • Metric: Lengths in meters, weights in tonnes, and volumes in cubic meters
  • Imperial (UK): Lengths in feet/inches, weights in long tons and volumes in imperial gallons
  • Imperial (US): Lengths in feet/inches, weights in pounds, and volumes in US gallons
  • Individual: Depends on the country of origin of each locomotive
Operator names

Here you can set the display of railway company names.

  • Short: Abbreviation or short form of the name
  • Standard: commonly used name, partially translated to English
  • Complete: full name in local language