Banner
Navigation
loco-info.com
The reference for locomotives and railcars
Navigation
Random
Search
Compare
Settings

Navigation

Page views since 2023-01-26: 8,208,615
Chesapeake & Ohio class J-3 “Greenbrier”
go back
United States | 1935
12 produced
No. 614 on display at C&O Railway Heritage Center in Clifton Forge, Virginia
No. 614 on display at C&O Railway Heritage Center in Clifton Forge, Virginia
Jarek Tuszyński / CC-BY-SA-3.0

At the Chesapeake & Ohio, the wheel arrangement 4-8-4 was not being called “Northern”, but “Greenbrier” after the hotel in White Sulphur Springs, West Virginia that was a famous destination of the C&O. For heavy express trains, the C&O operated a total of twelve locomotives of this wheel arrangement which were delivered in three batches between 1935 and 1948. These Greenbriers were built by Lima and formed the class J-3. They hauled famous trains like the George Washington, the Sportsman and the Fast Flying Virginian, but were sometimes also used for freight and pusher service, especially in war times.

The first batch, numbered 600 to 604, was built in 1935 and named after Virginia statesmen. They had a large modern boiler with a Worthington feed water heater, thermic syphons, arch tubes and a combustion chamber. Pressure was initially 250 psi, but later raised to 255 psi. Built with Walschaerts valve gear, they later received Baker valve gear. In addition to the 67,000 pounds of tractive effort provided by the four driving axles, a trailing truck booster raised the total to 81,000 pounds

Numbers 605 and 606 were built in 1942 and also named after Virginia statesmen. They got a pressure of 255 psi and Baker valve gear from the start and had roller bearings on all four truck axles. Since most high-strength steel was needed for the war efforts, Lima had to use more conventional steel, what increased the weight of the locomotives by 15 tons. After the introduction of the J-3a, these were called J-3b due to the changes compared to the first batch.

As the last 4-8-4 locomotives built for an American railroad, Lima built the last five Greenbriers in 1948. They only carried the numbers 610 to 614 and no names and due to several improvements, they became class J-3a. The driving wheels were now of the Boxpok type and had a diameter of 74 instead of 72 inches. Also the older locomotives now got 74 inch drivers. Roller bearings were now on all axles and on all other rotating parts of the running gear. The firebox lost its thermic syphons and arch types, but now had circulators, a larger combustion chamber and the flues in the boiler had an increased diameter. Instead of the Worthington feed water heater, they now had an Hancock exhaust steam injector

These locomotives delivered around 3,500 hp on the drawbar and had a top speed of 100 mph or 161 km/h. Some even say that they were capable of reaching 125 mph or 201 km/h. After all had been retired between 1953 and 1957, 614 was the only survivor. It was restored in 1980 and used as a testbed for Ross Rowland's ACE 3000 Project for a modern coal-burning steam locomotive to counter the rising oil costs. It was placed on static display at Clifton Forge, Virginia in 2012 after it had been used for excursion service. In June 2025 it was brought to the Strasburg Rail Road for an additional restoration into working order.

VariantJ-3J-3bJ-3a
General
Built193519421948
ManufacturerLima
Wheel arr.4-8-4 (Northern) 
Gauge4 ft 8 1/2 in (Standard gauge)
Dimensions and Weights
Length110 ft 10 1/8 in
Wheelbase46 ft 10 1/2 in
Rigid wheelbase19 ft 3 in
Total wheelbase98 ft 5 1/4 in
Service weight477,000 lbs506,300 lbs482,200 lbs
Adhesive weight278,300 lbs292,800 lbs285,200 lbs
Total weight858,700 lbs894,500 lbs868,330 lbs
Axle load69,700 lbs73,200 lbs71,700 lbs
Water capacity22,000 us gal21,500 us gal
Fuel capacity50,000 lbs (coal)
Boiler
Grate area100 sq ft
Firebox area520 sq ft482 sq ft
Tube heating area4,932 sq ft4,914 sq ft4,349 sq ft
Evaporative heating area5,452 sq ft5,434 sq ft4,831 sq ft
Superheater area2,342 sq ft2,315 sq ft
Total heating area7,794 sq ft7,749 sq ft7,146 sq ft
VariantJ-3J-3bJ-3a
Power Plant
Driver diameter72 in74 in
Boiler pressure250 psi255 psi
Expansion typesimple
Cylinderstwo, 27 1/2 x 30 in
Power
Power sourcesteam
Estimated power4,800 hp (3,579 kW)4,900 hp (3,654 kW)5,200 hp (3,878 kW)
Top speed100 mph
Starting effort66,960 lbf68,299 lbf66,453 lbf
Booster14,355 lbf12,400 lbf
Calculated Values
steam locomotive
express
booster
last changed: 11/2025
Drawing from the 1947 C&O diagram book
Drawing from the 1947 C&O diagram book
Watch on YouTube
Search
loadding loading...

We use cookies to save the following settings:

  • selected navigation structure
  • selected language
  • preferred units
  • spelling of railway company names

If you refuse the use of cookies, the settings will only be retained for the current session and will be reset to the default values the next time you visit the site.

Display of units

Here you can set the desired unit system for the technical data.

  • Metric: Lengths in meters, weights in tonnes, and volumes in cubic meters
  • Imperial (UK): Lengths in feet/inches, weights in long tons and volumes in imperial gallons
  • Imperial (US): Lengths in feet/inches, weights in pounds, and volumes in US gallons
  • Individual: Depends on the country of origin of each locomotive
Operator names

Here you can set the display of railway company names.

  • Short: Abbreviation or short form of the name
  • Standard: commonly used name, partially translated to English
  • Complete: full name in local language