loco-info.com
The reference for locomotives and railcars
Navigation
Random
Search
Compare
Settings
German Reichsbahn class 119
DB AG classes 219 and 229
Germany | 1976
200 produced
119 130 in December 1991 with a regional train made up of Rekowagen in Aue
119 130 in December 1991 with a regional train made up of Rekowagen in Aue
Werner & Hansjörg Brutzer

At the beginning of the 1970s, the Reichsbahn was looking for a new, powerful diesel locomotive that, however, should have a lower axle load than the class 130 procured from the Soviet Union, so that it could also be used without restrictions on branch lines. As part of the Comecon (Council for Mutual Economic Aid) agreements, Romania was given the task of developing a successor class for the V 180 or BR 118. Contrary to the wishes of the Reichsbahn, however, no engines from GDR production were installed, but licensed engines from the West German manufacturer MTU.

Similar to its German predecessor class, the new locomotive had an axle load of only 16 tonnes thanks to its six axles and was powered by two engines, initially with 900 kW each. The power was transmitted separately to both bogies by hydraulic transmissions. However, there was a heating generator between the engines, which in principle coupled the two with each other and was therefore supposed to lead to problems later in operation. In addition, many quality defects were soon identified, which led to disproportionately high failure rates, especially in the early days. The propulsion units of two defective locomotives were often combined in one locomotive body in order to obtain at least a small number of functional vehicles at short notice. Over the years, these problems have been increasingly eliminated, including the installation of 12KVD engines of indigenous production. Since these proved themselves, all locomotives were re-equipped at the beginning of the 1990s with a more powerful version, each with 1,100 kW.

In the years that followed, the cooperation between the two German railway administrations resulted in a total of 20 examples of the type now known as the class 219 being converted into the class 229. After a further increase in power and an increase in maximum speed to 140 km/h, these were increasingly used again in passenger transport and in some cases even replaced ICEs on non-electrified sections. Nevertheless, the life of the locomotives, also dubbed “submarines”, was coming to an end at the turn of the millennium. A locomotive with two 1,500 kW Caterpillar engines and a modern standard driver's cab thus remained a one-off. In the meantime, most of the 200 locomotives have been scrapped, with a few exceptions for construction trains and preserved locomotives.

General
Built1976-1985
ManufacturerFAUR
Axle configC-C 
Gauge4 ft 8 1/2 in (Standard gauge)
Dimensions and Weights
Length63 ft 11 11/16 in
Wheelbase47 ft 7 1/4 in
Rigid wheelbase11 ft 9 3/4 in
Service weight218,257 lbs
Adhesive weight218,257 lbs
Axle load36,376 lbs
Boiler
Power Plant
Power
Power sourcediesel-hydraulic
Top speed75 mph
Starting effort49,458 lbf
EngineJohannisthal 12KVD21-AL4
Engine type2x V12 diesel
Fuel1,057 us gal (diesel)
Engine output2,414 hp (1,800 kW)
Calculated Values
diesel locomotive
passenger
freight
secondary line
last changed: 03/2022
View on YouTube
loading...

We use cookies to save the following settings:

  • selected navigation structure
  • selected language
  • preferred units
  • spelling of railway company names

If you refuse the use of cookies, the settings will only be retained for the current session and will be reset to the default values the next time you visit the site.

Display of units

Here you can set the desired unit system for the technical data.

  • Metric: Lengths in meters, weights in tonnes, and volumes in cubic meters
  • Imperial (UK): Lengths in feet/inches, weights in long tons and volumes in imperial gallons
  • Imperial (US): Lengths in feet/inches, weights in pounds, and volumes in US gallons
  • Individual: Depends on the country of origin of each locomotive
Operator names

Here you can set the display of railway company names.

  • Short: Abbreviation or short form of the name
  • Standard: commonly used name, partially translated to English
  • Complete: full name in local language