loco-info.com
The reference for locomotives and railcars
Navigation
Random
Search
Compare
Settings

Navigation

Page views since 2023-01-26: 882000
German Reichsbahn class 01
Germany | 1926
231 produced
01 118 of the historic railway Frankfurt in original DRG lettering in May 2009
01 118 of the historic railway Frankfurt in original DRG lettering in May 2009
Eva Kröcher

The express locomotives of the class 01 were the first standard locomotives that the Reichsbahn purchased from 1925. These were Pacific locomotives with a two-cylinder engine. In contrast to the sister class 03, which was developed later, it had an axle load of 20 tonnes, which a high power possible, but limited the area of application to the few routes that had already been upgraded at the time. Before series production began, a comparison was made with the otherwise almost identical class 02 with a four-cylinder compound engine, which the 01 was able to claim for itself.

The features that all standard locomotives later had in common could be observed for the first time. In part, modern advances in steam locomotive design were ignored to allow for a simpler, standardized design. These included the abandonment of a combustion chamber and using two- and three-cylinder engines with simple steam expansion instead of compound engines. Due to the long boiler without a combustion chamber, the pipes were 6,800 mm long, which led to stresses in the material under heavy loads. These problems were also encountered with other large standard locomotives and they were only solved after the war when new boilers with a combustion chamber and thus shorter pipes were installed.

At the front, the large Wagner smoke deflectors and skirts were used, which led to a characteristic appearance. The top speed was initially 120 km/h, but was increased from 01 102 to 130 km/h by increasing the diameter of the front wheels from 850 to 1,000 mm and strengthening the brakes. The first series used the shorter 2'2 T 30 with ten tonnes of coal and 30 cubic meters of water as a tender. Later the 2'2 T 32 was used with the same amount of coal and 32 cubic meters of water and over the years many machines were given the 2'2 T 34 from the class 44.

Series production in larger numbers did not begin until 1930, but a total of 231 machines were built by 1938 and another ten were created from the conversion of the test locomotives of the class 02. After the war, the 01 remained a very important flagship for express trains for both German railway administrations for a long time. However, their condition made some modifications necessary, which were carried out on both sides. At the Bundesbahn they mainly received welded boilers with a combustion chamber, and at the Reichsbahn the changes were much more extensive. The resulting class 015 will be described in a separate article. The latter remained in use until 1982, while the decommissioning in the Bundesbahn was completed in 1973.

Variant1926 prototypes1927 variant1934 variant
General
Built19261927-19331934-1938
ManufacturerAEG, BMAG, Borsig, Henschel, Hohenzollern, Krupp
Axle config4-6-2 (Pacific) 
Gauge4 ft 8 1/2 in (Standard gauge)
Dimensions and Weights
Length75 ft 7 1/2 in78 ft 6 1/2 in
Wheelbase39 ft 4 7/16 in
Rigid wheelbase15 ft 1 1/8 in
Service weight240,083 lbs244,933 lbs
Adhesive weight130,514 lbs
Axle load44,533 lbs
Water capacity7,925 us gal8,454 us gal8,982 us gal
Fuel capacity22,046 lbs (coal)
Boiler
Grate area47.5 sq ft46.5 sq ft
Firebox area183 sq ft
Tube heating area2,374.1 sq ft2,660.3 sq ft
Evaporative heating area2,557.1 sq ft2,843.3 sq ft
Superheater area1,076.4 sq ft914.9 sq ft
Total heating area3,633.5 sq ft3,758.2 sq ft
Variant1926 prototypes1927 variant1934 variant
Power Plant
Driver diameter78.7 in
Boiler pressure232 psi
Expansion typesimple
Cylinderstwo, 23 5/8 x 26 intwo, 25 9/16 x 26 in
Power
Power sourcesteam
Indicated power2,210 hp (1,648 kW)
Optimal speed39 mph33 mph
Top speed75 mph81 mph
Starting effort36,328 lbf42,636 lbf
Calculated Values
steam locomotive
express
last changed: 03/2022
loading...

We use cookies to save the following settings:

  • selected navigation structure
  • selected language
  • preferred units
  • spelling of railway company names

If you refuse the use of cookies, the settings will only be retained for the current session and will be reset to the default values the next time you visit the site.

Display of units

Here you can set the desired unit system for the technical data.

  • Metric: Lengths in meters, weights in tonnes, and volumes in cubic meters
  • Imperial (UK): Lengths in feet/inches, weights in long tons and volumes in imperial gallons
  • Imperial (US): Lengths in feet/inches, weights in pounds, and volumes in US gallons
  • Individual: Depends on the country of origin of each locomotive
Operator names

Here you can set the display of railway company names.

  • Short: Abbreviation or short form of the name
  • Standard: commonly used name, partially translated to English
  • Complete: full name in local language