loco-info.com
The reference for locomotives and railcars
Navigation
Random
Search
Compare
Settings

Navigation

Page views since 2023-01-26: 882129
Little River Railroad No. 110
United States | 1911
only one produced

The Little River Railroad in Tennessee had steep grades which also had tight curves at the same time. In 1911, Baldwin delivered the number 110 to them for their passenger trains, which was built with an extra short wheelbase and is considered the smallest standard-gauge Pacific in the world. It has a large grate for burning low-quality coal, but no brick arch and no superheater

It pulled the “Elkmont Special,” which started in Knoxville until 1938, when the Little River became a pure logging railroad again. The 110 was now purchased by the Smoky Mountain Railroad and pulled freight trains there until 1954. Since 1976 it has been running on the new Little River Railroad, which is based in Michigan. It is still used there today as the flagship of this heritage railroad.

General
Built1911
ManufacturerBaldwin
Axle config4-6-2 (Pacific) 
Gauge4 ft 8 1/2 in (Standard gauge)
Dimensions and Weights
Wheelbase23 ft 4 in
Rigid wheelbase8 ft 4 in
Service weight109,000 lbs
Adhesive weight72,000 lbs
Total weight199,000 lbs
Axle load24,000 lbs
Water capacity3,500 us gal
Fuel capacity12,000 lbs (coal)
Boiler
Grate area30 sq ft
Firebox area100 sq ft
Tube heating area1,562 sq ft
Evaporative heating area1,662 sq ft
Total heating area1,662 sq ft
Power Plant
Driver diameter47 in
Boiler pressure180 psi
Expansion typesimple
Cylinderstwo, 16 x 22 in
Power
Power sourcesteam
Estimated power800 hp (597 kW)
Optimal speed28 mph
Starting effort18,334 lbf
Calculated Values
steam locomotive
passenger
secondary line
last changed: 02/2024
loading...

We use cookies to save the following settings:

  • selected navigation structure
  • selected language
  • preferred units
  • spelling of railway company names

If you refuse the use of cookies, the settings will only be retained for the current session and will be reset to the default values the next time you visit the site.

Display of units

Here you can set the desired unit system for the technical data.

  • Metric: Lengths in meters, weights in tonnes, and volumes in cubic meters
  • Imperial (UK): Lengths in feet/inches, weights in long tons and volumes in imperial gallons
  • Imperial (US): Lengths in feet/inches, weights in pounds, and volumes in US gallons
  • Individual: Depends on the country of origin of each locomotive
Operator names

Here you can set the display of railway company names.

  • Short: Abbreviation or short form of the name
  • Standard: commonly used name, partially translated to English
  • Complete: full name in local language