loco-info.com
The reference for locomotives and railcars
Navigation
Random
Search
Compare
Settings

Navigation

Page views since 2023-01-26: 689969
Wabash class J-2
United States | 1916
23 produced
No. 690 in October 1936 double-headed in front of another locomotive
No. 690 in October 1936 double-headed in front of another locomotive
Edward Lindquist / collection Taylor Rush

In 1912, the Wabash had procured the last new passenger locomotives with the 16 class J-1 Pacifics. In 1916, a class G-1 locomotive with a 2-6-2 wheel arrangement was taken instead and converted into a 4-6-2. The G-2 was particularly suitable because it already had 70-inch wheels and was less than ten years old. The locomotive was lengthened by about four feet and the leading axle was replaced with a bogie

Since the conversion was successful, another 22 of the total of 60 engines of the G-1 class were converted in this form. Some of these had received the numbers between 1676 and 1681 and were used between New York and Ontario, the others carried the numbers from 683 to 699 and remained entirely in the USA. The first of these was retired in January 1947 and the last in February 1952.

General
Built1916-1926
ManufacturerWabash Railroad
Axle config4-6-2 (Pacific) 
Gauge4 ft 8 1/2 in (Standard gauge)
Dimensions and Weights
Wheelbase34 ft 4 in
Rigid wheelbase13 ft 4 in
Total wheelbase64 ft 8 in
Service weight241,000 lbs
Adhesive weight151,400 lbs
Total weight394,000 lbs
Axle load52,900 lbs
Water capacity6,000 us gal
Fuel capacity20,000 lbs (coal)
Boiler
Grate area54.3 sq ft
Firebox area218 sq ft
Tube heating area2,947 sq ft
Evaporative heating area3,165 sq ft
Superheater area740 sq ft
Total heating area3,905 sq ft
Power Plant
Driver diameter70 in
Boiler pressure200 psi
Expansion typesimple
Cylinderstwo, 22 1/2 x 28 in
Power
Power sourcesteam
Estimated power1,975 hp (1,473 kW)
Optimal speed37 mph
Starting effort34,425 lbf
Calculated Values
steam locomotive
passenger
express
last changed: 10/2022
loading...

We use cookies to save the following settings:

  • selected navigation structure
  • selected language
  • preferred units
  • spelling of railway company names

If you refuse the use of cookies, the settings will only be retained for the current session and will be reset to the default values the next time you visit the site.

Display of units

Here you can set the desired unit system for the technical data.

  • Metric: Lengths in meters, weights in tonnes, and volumes in cubic meters
  • Imperial (UK): Lengths in feet/inches, weights in long tons and volumes in imperial gallons
  • Imperial (US): Lengths in feet/inches, weights in pounds, and volumes in US gallons
  • Individual: Depends on the country of origin of each locomotive
Operator names

Here you can set the display of railway company names.

  • Short: Abbreviation or short form of the name
  • Standard: commonly used name, partially translated to English
  • Complete: full name in local language